Asus KFN5-Q/SAS - Manual (Page 98)

4-28 Chapter 4: BIOS setup
CPU Fan 1/2/3/4 Speed [xxxxRPM] or [Ignored]
Front Fan 1/2/3/4/5/6 Speed [xxxxRPM] or [Ignored]
Rear Fan 1/2 Speed [xxxxRPM] or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU,
front, and rear fan speed in rotations per minute (RPM). If the fan is not
connected to the motherboard, the field shows N/A. Select [Ignored] if you
do not wish to display the detected temperatures.
Smart Fan Control [Smart Fan II]
Allows you to enable or disable the Smart Fan feature.
Configuration options: [Disabled] [Smart Fan] [Smart Fan II]
The CPU Target Temperature and System Target Temperature items
appear when you enabled the Smart Fan Control feature.
CPU 1/2/3/4 Target Temperature [66]
System 1/2 Target Temperature [66]
Allows you to set the CPU and system threshold temperature before the
Smart Fan Control is disabled. Configuration options: [50] [52] [54] [56]
[58] [60] [62] [64] [66] [68] [70] [72] [74] [76] [78] [80]
VCORE1 Voltage, VCORE2 Voltage, VCORE3 Voltage,
VCORE4 Voltage, VTT Voltage, 3V Voltage, 12V
Voltage, 5V Voltage, 5VSB Voltage, VBAT Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
4.4.9 Trusted Computing
The menu items allow you to configure Trusted Computing settings.
Trusted Computing
TCG/TPM SUPPORT [Yes]
Soft. Physical [No]
TPM Device [Disable]
Enable/Disable TPM
TCG (TPM 1.1/1.2)
support in BIOS.
TCG/TPM SUPPORT [Yes]
Enables or disables the TPM TCG (TPM 1.1/1.2) support in BIOS.
Configuration options: [No] [Yes]