Asus KFN5-Q/SAS - Manual (Page 93)

ASUS KFN5-Q Series 4-23
4.4.5 ACPI Configuration
This menu shows the Advanced Configuration and Power Interface (ACPI)
configuration settings. Select an item then press to display the
configuration options.
ACPI Configuration
ACPI Version Features [ACPI v2.0]
Headless Mode [Disabled]
EMS Support (SPCR) [Disabled]
ACPI MCFG Support [Enabled]
ACPI APIC Support [Enabled]
ACPI HPET TABLE [Disabled]
Enable RSDP pointers
to 64-bit Fixed
System Description
Tables. Different
ACPI version has some
addition.
ACPI Version Features [ACPI v2.0]
Allows you to enable RSDP pointers to 64-bit fixed system description
tables. Configuration options: [ACPI v1.0] [ACPI v2.0] [ACPI v3.0]
USB Mass Storage Device Configuration
The sub menu allows you to configure the USB Mass Storage Class
Devices.
USB Mass Storage Device Configuration
USB Mass Storage Reset Delay [20 Sec]
Device #1 Netac
Emulation Type [Auto]
Enable / Disable the
PCI device.
USB Mass Storage Reset Delay [20 Sec]
Number of seconds POST waits for the USB mass storage device after
start unit command.
Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]
Emulation Type [Auto]
If Auto, USB less than 530MB will be emulated as Floppy and
remaining as hard drive. Forced FDD option can be used to force an
HDD formatted drive to boot as FDD (ex. ZIP drive).
Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk]
[CDROM]