Asus KFN5-Q/SAS - Manual (Page 133)

5-26 Chapter 5: RAID configuration
2. On the next screen that appears, select View Existing Array.
3. The View Array screen appears. Here you can view properties of the
RAID array(s) created. If you have configured a hot spare, it will also
be listed. If you created more than one array, you may view the next
array by pressing .
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Select New Array Type -- SAS1068
View Existing Array View the existing configuration.
Create IM Volume Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create IME Volume Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL Data on array disks will be deleted!
Create IS Volume Create Integrated Striping array of
2 to 8 disks.
ALL Data on array disks will be deleted!
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item Alt+N = Next Array C= Create an array
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
View Array -- SAS1068
Array Type 1 of 1
Identifier LSILOGIC Logical Volume 3000
Type IME
Scan Order 0
Size(MB) 51498
Status Optimal
Manage Array
Slot Device Identifier RAID Hot Drive Pred Size
Num Disk Spr Status Fail (MB)
0 SEAGATE ST373454SS 0003 Yes NO Ok No 34331
2 SEAGATE ST373454SS 0003 Yes NO Ok No 34331
3 SEAGATE ST373454SS 0003 Yes NO Ok No 34331