Asus KFN5-Q/SAS - Manual (Page 46)

ASUS KFN5-Q Series 2-25
2. Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
3. Gigabit LAN controller setting (3-pin LAN_EN1, LAN_EN2)
These jumpers allow you to enable or disable the onboard Broadcom ®
BCM5721 Gigabit LAN controllers. The LAN_EN1 jumper controls the
LAN1 port. The LAN_EN2 iumper controls the LAN2 port.
KFN5-Q/SAS
KFN5-Q Series LAN_EN1 &
LAN_EN2 Setting
Enable
(Default)
Disable
2 1 2 3
Enable
(Default)
Disable
LAN_EN2
2 1 2 3
LAN_EN1