Asus KFN5-Q/SAS - Manual (Page 105)

ASUS KFN5-Q Series 4-35
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
Pressing does not immediately exit this menu. Select one of the
options from this menu or from the legend bar to exit.
4.8 Exit menu
The Exit menu items allow you to load the optimal or failsafe default values
for the BIOS items, and save or discard your changes to the BIOS items.
Exit & Save Changes
Once you are finished making your selections, choose this option from
the Exit menu to ensure the values you selected are saved to the CMOS
RAM. An onboard backup battery sustains the CMOS RAM so it stays on
even when the computer is turned off. When you select this option, a
confirmation window appears. Select Ok to save the changes and exit.
If you attempt to exit the Setup program without saving your changes,
the program prompts you with a message asking if you want to save
your changes before exiting. Press to save the changes while
exiting.
Exit & Discard Changes
Select this option only if you do not want to save the changes that
you made to the Setup program. If you made changes to fields other
than System Date, System Time, and Password, the BIOS asks for a
confirmation before exiting.
Discard Changes
Allows you to discard the selections you made and restore the previously
saved values. After selecting this option, a confirmation appears. Select Ok
to discard any changes and load the previously saved values.
Load Setup Defaults
Allows you to load the default values for each of the parameters on
the Setup menus. When you select this option or if you press , a
confirmation window appears. Select Ok to load default values. Select Exit
& Save Changes or make other changes before saving the values to the
non-volatile RAM.