Asus KFN5-Q/SAS - Manual (Page 132)

ASUS KFN5-Q Series 5-25
6. Repeat step 5 to add the other disks to the volume.
7. When done, press to create the array, then select Save changes
then exit this menu.
Create and save new array?
Exit the Configuration Utility and Reboot
Cancel Exit
Save changes then exit this menu
Discard changes then exit this menu
8. The utility creates the array.
LSI Logic MPT Setup Utility v6.05.06.00 (2006.01.16)
Processing... may take up to 1 minute
Creating RAID Arrow ...
5.3.4 Managing Arrays
The LSI Logic MPT Setup Utility allows you to perform other tasks related
to configuring and maintaining IM and IME volumes.
Refer to this section to view volume properties, manage the hot spare disk,
synchronize the array, activate the array, and delete the array.
Viewing volume properties
To view volume properties
1. On the main menu, select RAID Properties.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter Properties -- SAS1068
Adapter SAS1068
PCI Slot 00
PCI Address(Bus/Dev/Func) 05.03.00
MPT Firmware Revision 1.15.00.00-IR
SAS Address 500E0180:60831008
NVIDIA Version 25.02
Status Disabled
Boot Order 0
Boot Support (Enabled OS only)
RAID Properties
SAS Topology
Advanced Adapter Properties