Asus KFN5-Q/SAS - Manual (Page 125)

5-18 Chapter 5: RAID configuration
3. The following screen appears. Select a channel and press to
enter the setup.
4. The Adapter Properties screen appears.
Use the arrow keys to select RAID Properties, then press .
The numbers of the channel depend on the controller.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter Properties -- SAS1068
Adapter SAS1068
PCI Slot 00
PCI Address(Bus/Dev/Func) 05.03.00
MPT Firmware Revision 1.15.00.00.IR
SAS Address 500E0180:60831008
NVIDIA Version 25.02
Status Disabled
Boot Order 0
Boot Support Enabled OS only
RAID Properties
SAS Topology
Advanced Adapter Properties
5. The Select New Array Type screen apprears.
Use the arrow keys to select Create IM Volume, then press .
Esc = Exit Menu F1/Shift+1 = Help
Allt+N = Global Properties -/+ = Alter Boot Order Ins/Del = Alter Boot List
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter List Global Properties
Adapter PCI PCI PCI PCI FW Revision Status Boot
BUS Dev Fnc Slot
SAS1068 05 03 00 00 1.15.00.00-IR Disabled 0