Asus KFN5-Q/SAS - Manual (Page 91)

ASUS KFN5-Q Series 4-21
Onboard SAS/LAN/PCI Slot Configuration
The sub menu allows you to configure the Onboard SAS, LAN, and PCI slots.
Onboard SAS Configuration
Information : Bus 6, Dev 5
Device [Enabled]
Option ROM Scan [Enabled]
Option ROM Priority [Normal]
Bus Master [Enabled]
Latency Timer [Default]
Enable / Disable the
PCI device.
Device [Enabled]
Enables or disables the PCI device.
Configuration options: [Disabled] [Enabled]
Option ROM Scan [Enabled]
Enables or disables the initialization of device expansion ROM.
Configuration options: [Disabled] [Enabled]
Option ROM Priority [Normal]
Allows you to set the ROM priority.
Configuration options: [Low] [Normal] [High] [Highest]
Bus Master [Enabled]
Enables or disables the selected device as a PCI bus master.
Configuration options: [Disabled] [Enabled]
Latency Timer [Default]
Allows you to set the value in units of PCI clocks for PCI device latency
timer register.
Configuration options: [Default] [32] [64] [96] [128] [160] [192]
[224]
Plug And Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set
to [Yes] and if you install a Plug and Play operating system, the operating
system configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Configuration options: [Disabled] [Enabled]