Asus KFN5-Q/SAS - Manual (Page 94)

4-24 Chapter 4: BIOS setup
Headless Mode [Disabled]
Allows you to enable or disable the headless operation mode through ACPI.
Configuration options: [Enabled] [Disabled]
EMS Support [Disabled]
Enables or disables EMS support. It includes ACPI SPCR table pointer to
RSDT pointer list.
Configuration options: [Disabled] [Enabled]
ACPI MCFG Support [Enabled]
Enables or disables ACPI MCFG table.
Configuration options: [Disabled] [Enabled]
ACPI APIC Support [Enabled]
Enables or disables ACPI APIC table. It includes ACPI APIC table pointer to
RSDT pointer list.
Configuration options: [Disabled] [Enabled]
ACPI HPET TABLE [Disabled]
Enables or disables High Precision Event Timer.
Configuration options: [Disabled] [Enabled]
4.4.6 Peripheral Devices Configuration
This menu shows the peripheral devices configuration settings. Select an
item then press to display the configuration options.
Configure Win67EHF Super IO Chipset
Onboard Floppy Controller [Enabled]
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
Allows BIOS to Enable
or Disable Floppy
Controller.
Onboard Floppy Controller [Enabled]
Enables or disables the floppy disk controller.
Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to configure Serial Port1 Base Addresses.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]