Asus KFN5-Q/SAS User Manual

Page 57

2-36

Chapter 2: Hardware information

7. USB connector (10-1 pin USB34)

This connector is for USB 2.0 ports. Connect the USB module cable to

this connector, then install the module to a slot opening at the back

of the system chassis. This USB connector complies with USB 2.0

specification that supports up to 480 Mbps connection speed.

8. System panel auxiliary connector (20-2 pin AUX_PANEL1)

This connector supports several server system functions.

Chassis intrusion connector (3-pin CASE OPEN)

This lead is for a chassis with an intrusion detection feature. This

requires an external detection mechanism such as a chassis intrusion

sensor or microswitch. When you remove any chassis component, the

sensor triggers and sends a high level signal to this lead to record a

chassis intrusion event.

LAN1 link activity LED (2-pin LAN1_LINKACTLED)

This 2-pin connector is for the LAN1 Activity LED. Connect the LAN1

Activity LED cable to this connector. This LED blinks during a network

activity and is always lit when linked.

LAN2 link activity LED (2-pin LAN2_LINKACTLED)

This 2-pin connector is for the LAN2 Activity LED. Connect the LAN2

Activity LED cable to this connector. This connector blinks during a

network activity and lights up when linked.

Locator LED 1 (2-pin LOCATORLED1)

This 2-pin connector is for the Locator LED 1. Connect the Locator

LED 1 cable to this connector. This LED lights up when the locator

button is pressed.

Locator LED 2 (2-pin LOCATORLED2)

This 2-pin locator is for the Locator LED 2. Connect the Locator LED 2

cable to this connector.