Asus V66 - Manual (Page 66)

58
Typical Stopwatch Functions
If you select the Typical stopwatch, you are
then prompted to select one of three functions:
Split Timing, Lap Timing, or Record.
Split timing can time portions within a main
recording.
To enter a split time:
1. Press the right soft key to select Mark.
The current time elapsed then appears in
a list of times, while the stopwatch
continues to run.
2. Select Mark again to add another split
time to the list.
The Lap Timer, like the Split Timer, records
portions, or laps, of a main timing. The Split
Timer, however, displays cumulative time
elapsed, whereas the lap timer displays
individual lap times.
To enter a lap time:
Press the right soft key to select Lap. The
lap time is then added to a list of lap times.
Select Record to view saved stopwatch
records.
nWay Stopwatch
The nWay stopwatch enables you to track up to
four individual times simultaneously.
To use the nWay stopwatch:
1. Select Start. All the times begin to record.
2. There are four times, marked by up, down,
right and left arrows.
Select a time by pressing the correspond-
ing up, down, right, or left joystick keys.
The selected time is then colored red.
3. Press the left soft key to select Stop or
Resume for individual times.
4. If you select a time, the time restarts.
File Manager
The file manager is a feature that enables you
to find and manipulate files stored in the
memory of your phone or on a mini SD card if
installed.
To open the file manager:
1. From the main menu, select Organizer >
File Manager.
Two virtual disk drives are displayed. The
first in the list represents the mini SD
memory card, and the second represents
the internal handset memory.
2. Use the joystick to highlight a drive and
press the enter key to confirm.
Options for the selected drive are then
displayed. You can open the drive and
view contents, create a new folder, or
format the drive. You can also select the
Remove option to remove a mini SD card.