Asus V66 - Manual (Page 25)

17
Calls
Answering a Call
When you receive a call, the phone alerts you
by sounding the ring tone and vibration
according to the specified ring tone and
vibration settings. To answer the call, do the
following:
1. Press the Call key to answer the call.
2. Press the Power/end key to end the
call and disconnect.
Alternately, select Option > Answer to answer
the call.
Answer Mode
The default setting for the phone is to answer
when you press the Call key. However, you
can also set the phone to pick up by pressing
any key. To enable the phone to answer a call
by pressing any key, select Manner and then
choose the manner setting that you want.
For example, if you select General, then
choose Personalize > Answer Mode > Any
Key. Set the Any Key option to On to enable
the setting.
Remember to Activate the manner setting to
make sure that the answer mode is set.
Calls
Making a call
Follow these steps to place a call:
1.Enter the number you wish to dial using
the keypad. If you make a mistake, select
Clear to delete at any time. The right soft
key is just under the word Clear on the
lower right screen; select this key to clear
a number.
2.Press the Power/end key to cancel the
call and return to standby mode. Alter-
nately, select Abort using the right soft
key to cancel the call.
3.Press the Call key to connect the call
after you finish dialing the number.
4.Press the Power/end key to discon-
nect the call.
Making International Calls
To dial an international call, do the following:
1. First enter a + by holding down the * key.
2. After the +, enter the international access
code for the country you wish to dial,
followed by the telephone number
including the area code.