22 snmp – Asus GigaX3112 User Manual
Page 96
83
GigaX3112 Series Layer 3 Managed Switch
5.3.21.3 qos mode
This command sets qos mode to highfirst mode.
CLI Syntax: qos mode high_first
Example: (config)# qos mode high_first
5.3.21.4 show qos mode
This command shows the qos mode.
CLI Syntax: show qos mode
Example: (config)# show qos mode
5.3.21.5 qos egress bandwidth
This command used to set the Qos bandwidth informational parameter for the
outcoming packets.
CLI Syntax: qos egress bandwidth LIMIT_RATE BURST_RATE
Example: (config)# int gi1/0/2
(config-if)# qos egress bandwidth 100 10
5.3.22 SNMP
5.3.22.1 show rmon statistics
To show rmon statistics IFNAME status.
CLI Syntax: show rmon statistics [IFNAME]
Example: ASUS# show rmon statistics gi1/0/1
5.3.22.2 show snmp-server community
To show snmp-server community.
CLI Syntax: show snmp-server community
Example: ASUS# show snmp-server community
5.3.22.3 snmp-server host
This command sets the SNMP host information.
CLI Syntax: snmp-server host A.B.C.D
Example: (config)# snmp-server host 192.168.8.31