Asus GigaX3112 - Manual (Page 82)

69
GigaX3112 Series Layer 3 Managed Switch
Figure 72. SYS commands
5.3.3.11 IP Address and Network Mask
Displays the IP address for the switch. This IP address is used for manageable
purpose, i.e.; network applications such as, http server, SNMP server, tftp server,
ssh and telnet server of the switch are all using this IP address in interface
vlan1.
CLI Syntax: ip address A.B.C.D/M
Example: (config)# interface vlan 1
(config-if)# ip address 192.168.20.121/24
5.3.3.12 Default Gateway
Displays the IP address of the default gateway. This field is necessary if the
switch network contains one or more routers.
CLI Syntax: ip route A.B.C.D/M (A.B.C.D|INTERFACE)
Example: (config)# ip route 0.0.0.0/0 192.168.1.2
5.3.3.13 reboot
Use this command to reboot the system.
CLI Syntax: reboot
Example: reboot
5.3.3.14 reload default-config file
Use this command to copy a default-config file to replace the current one.
CLI Syntax: reload default-config file
Example: ASUS# reload default-config file
5.3.3.15 show running-config
To show running-config fule.
CLI Syntax: show running-config
Example: ASUS# show running-config