Asus GigaX3112 User Manual
Page 38
25
GigaX3112 Series Layer 3 Managed Switch
• All the ports in the link aggregation group MUST operate in full-
duplex mode at the same speed.
• All the ports in the link aggregation group MUST be configured
in auto-negotiation mode or full duplex mode. This configuration
will make the full duplex link possible. If you set the ports in full
duplex force mode, then the link partner MUST have the same
setting. Otherwise the link aggregation could operate abnormally.
• All the ports in the link aggregation group MUST have the same
VLAN setting.
• All the ports in the link aggregation group are treated as a single
logical link. That is, if any member changes an attribute, the
others will change also. For example, a trunk group consists of
port 1 and 2. If the VLAN of port 1 changes, the VLAN of port 2
also changes with port 1
Note
Figure 24. Link aggregation (GigaX 3112F)