2 setting up through the web interface – Asus GigaX3112 User Manual
Page 25
12
GigaX3112 Series Layer 3 Managed Switch
Figure 6. Login screen
Enter your user name and password, and then click to enter the Configuration
Manager. Use the following defaults the first time you log into this interface:
Default User Name:
admin
Default Password:
You can change the password at any time (see section 6.3.1).
The browser will download java applet from the switch and it will
take a little time.
3.3.2 Setting up through the web interface
To successfully connect your PC to the switch, your PC must have a valid IP
in your network. Contact your network administrator to obtain a valid IP for the
switch. If you wish to change the default IP address of the switch, follow section
3.3.1 to change the IP address.
If Java Runtime Environment is not installed on your PC, Your PC will
automatically downloads and installs it. It means that your PC should be able
to reach the web site. If the Internet is not available, you should prepare it on
diskette and install it.
From any PC connected to the network that the switch can access, open your
Web browser (Internet Explorer), and type the following URL in the address/
location box, and press
http://192.168.1.1
This is the factory default IP address of the switch.
A login screen appears, as shown in Figure 6.
Note