Asus GigaX3112 User Manual

Page 26

GigaX3112 Series Layer 3 Managed Switch

To setup a new IP address, click “System”, select IP Setup. Fill in the IP address,

network mask and default gateway, then click

OK.

If your new address is different from the default, the browser wonʼt be able to

update the switch status window or retrieve any page. This is normal. You have

to retype the new IP address in the address/location box, and press .

The WEB link returns.
A login window appears immediately after you click

OK. See the ﬁgures on the

next page.

Note that the GigaX 3112 and GigaX 3112F models have the

same web interface, except for the front panel image on top of

the screen (see ﬁgures on the next page).
The following sections show only Gx3112F image as example to

conﬁgure both GigaX3112 and GigaX3112F model.

Note

Figure 7. IP setup (GigaX 3112F)

This manual is related to the following products: