3 reboot 4.3.4 firmware upgrade, 3 reboot, 4 firmware upgrade – Asus GigaX3112 User Manual

Page 32

GigaX3112 Series Layer 3 Managed Switch

Figure 16. IP Setup page

4.3.3 Reboot

The Reboot page contains a

Reboot button. Clicking the button reboots the system.

Rebooting the system stops the network traffic and terminates

the Web interface connection.

4.3.4 Firmware upgrade

The Firmware page contains the following information:

Hardware Version: shows the hardware revision number.
Boot ROM Version: shows the version of the boot code
Firmware Version: shows the current running firmware version. This

number will be updated after the ﬁrmware update.

Enter the TFTP server IP address and firmware file name. Click

Upgrade to

update the switch ﬁrmware. See Figure 17 for reference. For example,

TFTP Server: 192.168.1.155
File Name: 3112Single-v10.img

Clicking the upload button loads the assigned firmware to the

switch, then reboot system after a successful ﬁrmware update.

You have to re-login to web interface again.
If the upgrade is performed under bootrom mode, Start-Up

conﬁguration ﬁle will be lost.
We strongly recommend you to backup “startup-config” before

upgrading.

Warning

This manual is related to the following products:

GigaX3112F