3 radius – Asus GigaX3112 User Manual
Page 69
56
GigaX3112 Series Layer 3 Managed Switch
Note
Figure 61. Dial-In user
4.9.3 RADIUS
In order to use external RADIUS server, the following parameters are required to
be setup:
Authentication Server IP: The IP address of the RADIUS server.
Authentication Server Port: The port number for the RADIUS server is
listening to.
Authentication Server Key: The key is used for communications between
GigaX and the RADIUS server.
Confirm Authentication Key: Re-type the key entered above.
The VLAN of the RADIUS server connected to the switch must
be the same as the VLAN of the system management interface.
Click
OK to make the settings permanent. Click Reload to refresh the settings to
current value.
This manual is related to the following products: