4 physical interface commands, 1 interface mode 5.3.4.2 interface duplex – Asus GigaX3112 User Manual

Page 83

GigaX3112 Series Layer 3 Managed Switch

5.3.3.16 write memory

Use the write file configuration command on the switch stack or standalone

switch to write conﬁguration to the ﬁle.

CLI Syntax: write memory
Example: ASUS# write memory

5.3.3.17 Assign a new user account

Add a user, which is named tony and its password is tony123456

CLI Syntax: add user WORD WORD
Example: add user tony tony123456

5.3.3.18 Delete a new user account

Delete a user account, which is named tony.

CLI Syntax: delete user WORD
Example: delete user tony

5.3.4 Physical interface commands

5.3.4.1 Interface mode

Use the auto-negotiation configuration command on the switch to set auto-

negotiation status of the port.

CLI Syntax: auto-negotiation
Example: (conﬁg)# interface gi1/0/2

(conﬁg-if)# auto-negotiation

This example shows how to use the auto-negotiation conﬁguration command on

the switch to enable auto-negotiation mode.

5.3.4.2 Interface duplex

Use the duplex conﬁguration command on the switch to set duplex status of the

port.

CLI Syntax: duplex (full| half)
Example: (conﬁg)# interface gi1/0/2

(conﬁg-if)# duplex full

This example shows how to use the duplex configuration command on the

switch to set full-duplex on the interface.

This manual is related to the following products: