Asus PCI-DA2200 - Manual (Page 358)

ASUS GUI RAID Manager: Troubleshooting
B-6 SNMP Errors
Solution1: Install the appropriate SNMP service for the
environment you are using for the local host or the remote manager
station. You can get this service from the software provider; that is,
Microsoft for Windows NT and Windows 95, and Novell for
NetWare.
Error Message2: Failed to open SNMP agent comm
Cause2: This error can be caused by one (or more) of the following:
the SNMP agent is not reachable over the LAN or WAN, the SNMP
service is not properly installed on the local host and/or the remote
manager station, the GUI RAID Manager’s SNMP agent software is
not installed on the local host, or the disk array controller is not
installed or properly connected.
Solution2: Check the LAN/WAN connections, install the required
software to the local host and/or remote manager station, check the
SNMP service settings, and check that the controller is properly
installed and connected.