Asus PCI-DA2200 - Manual (Page 224)

ASUS GUI RAID Manager: Basic Operations at Startup
3-10 3.2 Connecting and Disconnecting from a Disk Array
3. In the Agent Name or IP Address text box, type in the IP
address of the local host where the target disk array system is
connected. Alternatively, you may specify the host name of
the local host.
4. In the Community Name text box, type in one of the
community names of the SNMP agent. Community names
act as passwords that screen accesses to the SNMP agent of a
particular network device. Before access is granted to a
requesting station, this station must incorporate a valid
community name to its request; otherwise, the SNMP agent
will deny access to the system.
By default, most network devices use “public” as one of
their community names. This value is case-sensitive.
5. In the Agent-side Communication Type section, click on
the RS-232 Interface option button. Then, specify the COM
port number and the baud rate.