GE Industrial Solutions AF-300 P11 - Manual (Page 80)

5-27
E45 LCD monitor (display selection)
E 4 5 L C D M N T R
This function selects the items to be displayed on the
LCD monitor in operation mode.
Value Display Items
0
Operation status, direction of rotation,
operation guide
1
Output frequency before slip compensation,
output current, calculated torque in bar graph
Set value: 0
During running When stopping
E 4 6
E 4 7
E46 LCD monitor (language)
E 4 6 L A N G U A G E
This function selects the language for data display on the
LCD monitor.
Value Language Value Language
0 Japanese 3 French
1 English 4 Spanish
2 German 5 Italian
Note: English language is used for all LCD screens in
this manual.
E47 LCD monitor (contrast adjustment)
E 4 7 C O N T R A S T
This function adjusts the LCD contrast. Increase the set
value to raise contrast and decrease to lower contrast.
Value 0, 1, 2 • • • • • • 8, 9, 10
Screen Low High
60.00
STOP
PRG PRG
MENU
F/D
LED SHIFT
60.00
Hz
A
%
Fout/Iout/TRQ
60.00
RUN
FWD
Set value: 1
Full scale value of bar graph
Display item Full scale
Output frequency Maximum frequency
Output current 200% of drive rated value
Calculated torque value 200% of motor rated value
Note: The scale cannot be adjusted.