3 handling the product – GE Industrial Solutions AF-300 P11 User Manual

Page 15

1-2

1.3 Handling the Product

(1) Removing the Cover

For drives 30HP or less, loosen the cover mounting screws, then remove the cover by pulling from the top (see Figure
1.3.1).

Fig.1-3-1 Removing the Cover (for drives of 30HP or less)

For drives 40HP or more, first remove the six cover mounting screws, then remove the cover.

Fig.1-3-2 Removing the Cover (for drives of 40HP or more)

(2) Removing the Keypad Panel

After removing the cover as explained in (1), loosen the keypad panel mounting screws and remove as shown in Figure
1.3.3 for drives 30HP or less.

Fig.1-3-3 Removing the Keypad Panel (for drives of 30 HP or less)

For drives 40HP or more, loosen the keypad panel mounting screws and remove, using the finger holds on the keypad
panel case.

Mounting screws of service
cover (6 positions total)

Mounting screws of
Keypad panel

Keypad panel case

Fig.1-3-4 Removing the Keypad Panel (for drives 40HP or more)