GE Industrial Solutions DV-300 DC Quick Start - Manual (Page 17)

DV-300 Adjustable Speed Drives
—————— Quick Start up guide ——————
QS
17
Analog input 1 sel
Off
Press ENT
Press CANC twice to get back to
START UP
Analog inputs
Speed reference is controlled from the keypad using:
DRIVE STATUS
Ramp ref 1
Press ENT
OR
INPUT VARIABLES
Ramp Ref
Press ENT
Ramp Ref
Ramp ref 1
Press ENT,
enter the desired rpm reference using the arrow keys
and the + - keys, press ENT
SAVE PARAMETERS
Hold down the down arrow until the [Save
parameters] is seen, press ENT.
START UP
Save parameters
Press ENT
Power down the drive, and reconnect the field circuit
connector if it was removed for the initial
configuration of the drive per section 4a.