GE Industrial Solutions CPS2400U - Manual (Page 19)

CPS2400U Upstream System – 19” Product Manual CPS2400U
850028186 r04 December 2013 19
Step Action
3. Set the shelf address rotary switch to indicate a shelf ID (0, 0 if not equipped with a controller).
Use a small Phillips screw driver.
Start with shelf ID 1 at the bottom and progress up the frame to higher numbers.
Settings for shelf 1 and shelf 6 shown in Figure 16.
Note: “Cards per Shelf” is factory set to the unit digit of the number of card slots per shelf,
set to 2 for 12 cards per shelf.
Figure 16 Shelf ID Setting
4. Insert alarm card and close door.
Repeat for each remaining Alarm Card.