B&B Electronics EIR508-T - Manual - Manual (Page 61)

Manual Documentation Number: EIR508-2xx-T 1713m 61
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Save Configuration
Save the configuration to flash memory. If the switch is powered off without
saving the configuration, all changed configuration will lost.
 Click
Save Flash
Save Configuration Interface
Rate Control
Set up every port
’s bandwidth rate and packet limitation type
 Limit Packet type: Select the packet type to filter. The packet types
have are all packet types, broadcast/multicast/unknown unicast packets,
broadcast/multicast packets, and broadcast packet only. The
broadcast/multicast/unknown unicast packet, broadcast/multicast
packet, and broadcast packet only are only for ingress. The egress rate
only supports all packet types.
 Band Width: Ports 1 through 8 support port ingress and egress rate
control. For example, assume port 1 is 10Mbps, users can set its
effective egress rate to 1Mbps, and the ingress rate to 500Kbps.
 Ingress: Select the port effective ingress rate. The valid range
value is 1MB, 2MB, 4MB, 8MB, 16MB, 32MB and 64MB. The
default value is
“disable”
 Egress: Select the port effective ingress rate. The valid range
value is 128kbps, 256Kbps, 512Kbps, 1MB, 2MB, 4MB, and 8MB.
The default value is
“disable.”
 Click
Apply