B&B Electronics EIR508-T - Manual - Manual (Page 49)

Manual Documentation Number: EIR508-2xx-T 1713m 49
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
RSTP – System Configuration Interface
Per Port Configuration
Configure path cost and priority of every port
 Select the port in Port column
 Path Cost: The cost of the path to the other bridge from this
transmitting bridge at the specified port. Enter a number 1 through
200000000
 Priority: Network priority. Enter a number from 0 to 240. The value of
priority must be a multiple of 16
 Admin P2P: Some of the rapid state transactions that are possible
within RSTP are dependent upon whether the port concerned can only
be connected to one other bridge (i.e. it is served by a point-to-point
LAN segment), or whether it can be connected to two or more bridges