B&B Electronics EIR508-T - Manual - Manual (Page 22)

22
Manual Documentation Number: EIR508-2xx-T 1713m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Hardware Installation
Installation Steps
1. Unpack the switch
2. Ensure the DIN-Rail is tightly screwed to the switch. If it is not, refer to
DIN-Rail Mounting section. If panel mounting is desired, refer to Panel
Mounting Section.
3. Mount the switch.
4. Apply power to the switch. The power LED will light up.
5. Connect CAT 5 cables to the indu strial switch’s RJ-45 ports and the
network devices.
[NOTE] If the network devices do not support MDI/MDI-X, a
crossover cable will be required.
6. (Fiber Models Only) Connect the fiber optic cables to the industrial
switch and the network devices. Ensure
that the switch’s fiber optic
transmitter is connected to the network devices receiver and vice versa.
7.
When all the connections are made and the LED’s show normal
indication, the installation is complete.