B&B Electronics EIR508-T - Manual - Manual (Page 52)

52
Manual Documentation Number: EIR508-2xx-T 1713m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
function.
 Coupling port: Assign the member port.
 Control port: Set the switch as the master switch in the coupling ring.
 Enable Dual Homing: Set up one of port to be the Dual Homing port.
In an X-Ring group, only one can be a Dual Homing port. This function
will only work when the X-Ring function is enabled.
 Click
Apply
X-Ring Interface
[NOTE]
1. When the X-Ring function is enabled, the RSTP function must be
disabled.
2. If the configuration is not saved, it will be lost when the switch is
powered off.
QoS Configuration
Configure QoS setting of every port
 QoS Policy: Select the QoS policy rule
 Using the 8,4,2,1 weight fair queue scheme: The switch will
follow 8:4:2:1 rate to process priority queue from Highest to lowest..
For example: the system will process 8 high queue packets, 4
middle queue packets, 2 low queue packets, and one lowest