B&B Electronics SPP-100 - Manual - Manual (Page 29)

4. Windows NT Installation
To allow easy configuration of the DSP-100 the Quatech Device Manager
for Windows NT has been written for the hardware. This configuration
utility supports the SPP-100 only in block addressing mode.
To begin the installation, open Windows Explorer and search for the
‘Setup.exe’ command to install the Quatech Device Manager. ing Windows Explorer figure.> (D:\Serial Port
Adapters\Drivers\Windows NT 4.0 for PCI, PCMCIA,ISA). Once the
installation is complete an icon will be placed on the desktop.
Figure 8. Windows NT Explorer
SPP-100 User's Manual 4-1