Moog Music Taurus 3 Bass Pedals - Manual (Page 46)

Page 48
Taurus 3 User’s Manual - The User Interface
Page 49
Taurus 3 User’s Manual - The User Interface
Allows you to calibrate the VOLUME Footwheel. Press STORE to ac-
cess the VOLUME Footwheel calibration menu.
You will be asked if you wish to proceed. Use the VALUE knob to select
YES or NO. If you are uncertain, or if you change your mind about
performing this calibration, select ‘NO’ and press STORE, and you will
return to the System Utilities Calibration menu. To proceed with the
calibration, you should first move the VOLUME footwheel to its middle
position, then select ‘YES’ and press STORE.
The Volume Wheel calibration menu will appear. To calibrate, move the
VOLUME footwheel to the maximum position (UP) and minimum (DN)
positions.
As you move the footwheel, the display will update the maximum and
minimum values. To complete the calibration, press STORE. You will be
returned to the Calibration menu.
NOTE: If this calibration is done incorrectly, the footwheel may not operate normally. If this
should this happen, try recalibrating the footwheel again using the procedure above.
CALIBRATION (con’t)
VOLUME WHEEL