Moog Music Taurus 3 Bass Pedals - Manual (Page 32)

Page 34
Taurus 3 User’s Manual - The User Interface
Page 35
Taurus 3 User’s Manual - The User Interface
MIDI CHANNELS IN/OUT:
MIDI SETUP:
MIDI Setup is a set of seven menus to configure T3 MIDI options. For
complete information on MIDI Setup menus commands, see MIDI Setup
Menus, page 38.
Allows you to select the T3 MIDI In and Out channels. The T3 can send
and receive on only one channel at a time, but the send and receive
channels can be set independently. To change the MIDI channel, use
the CURSOR button to highlight the desired parameter, then use the
VALUE knob to select the new parameter value.
Values: OFF, 1 – 16;
the default values are 1 for both MIDI In and MIDI Out
SysEx (System Exclusive) is a set of commands to transmit and receive
selected presets, bulk dumps and firmware dumps. For complete infor-
mation on SysEx commands, see System Exclusive Menus, page 42.
System Utilities is a set of commands used to perform a system reboot,
restore factory default values or perform various system calibrations on
the instrument. For complete information, see System Utilities Menus,
page 44.
SYSEX:
SYSTEM UTILITIES:
PERFORMANCE TIP: You can quickly change a Master Menu parameter during performance
by first entering Master Mode and select the desired parameter menu using the VALUE knob,
then return to Preset Mode. When you are ready to make the change, press Master. The
desired menu item will be displayed, allowing you to quickly make adjustments.