Moog Music Taurus 3 Bass Pedals - Manual (Page 43)

Page 44
Taurus 3 User’s Manual - The User Interface
Page 45
Taurus 3 User’s Manual - The User Interface
Allows you to perform a Master Reboot of the T3, which is similar to
turning the power OFF and ON. To perform this action, press STORE.
You will be asked to confirm this operation (Yes/No). If you are unsure,
select NO and press STORE to return to the System Utilities menu
without any action. If you are sure, use the VALUE knob to select YES
and press STORE. This will reboot the T3.
MASTER REBOOT:
Allows you to perform a ‘Factory Restore’, which will restore the global
default values and all factory presets. To execute this operation, press
STORE to activate.
NOTE: You should back up any presets you
wish to save prior to performing this action.
RESTORE FACTORY:
You will be asked to confirm this operation (Yes/No). If you are unsure,
select NO and press STORE to return to the System Utilities menu
without any action. If you are sure you wish to continue, use the VALUE
knob to change from NO to YES and press STORE. This will restore the
factory default global values, performance presets and factory presets.
While the restore process is taking place, the LCD will briefly display a
series of status messages. When complete, the screen will briefly display
a ‘SUCCESS’ message and return to the System Utilities menu.