Moog Music Taurus 3 Bass Pedals - Manual (Page 40)

Page 42
Taurus 3 User’s Manual - The User Interface
Page 43
Taurus 3 User’s Manual - The User Interface
E. System Exclusive (SysEx) Menus
SysEx menus are a set of commands to transmit and receive selected presets, bulk dumps and firmware
dumps. To enable SysEx menus, press the CURSOR button. This will highlight the menu options shown on
the lower line of the display. Once highlighted, use the VALUE knob to scroll through the menus. To acti-
vate a command, press the STORE button.
This option allows you to send the current Preset (as system exclusive
data) for archiving to a computer or transferring to another T3. This op-
eration requires another T3, or a computer with a MIDI interface and a
program that can accept a SysEx dump. You must enable the device that
is to receive the SysEx data. Once the remote device is enabled, press
STORE to initiate the data transfer.
The LCD will briefly display a ‘SENDING CUR PRESET’ status message.
When the transfer is complete, the display will return to the SYSEX
menu.
SEND CURRENT PRESET:
This option allows you to send the system exclusive data for archiving
the complete bank of Presets in the T3’s memory. To complete this
command, enable the device that will receive the SysEx data, then press
STORE to initiate the data transfer.
When the data transfer process starts, the LCD will briefly display a
‘SENDING ALL PRESETS’ status message. When the transfer is com-
plete, the display will return to the SYSEX menu.
SEND ALL PRESETS:
This option allows you to save the entire state of the T3 (including all
global data and Preset data) for later recovery. To execute a bulk dump,
enable the device that will receive the SysEx data, then press STORE to
initiate the data transfer.
When the data transfer process starts, the LCD will briefly display a
‘SENDING BULK DATA’ status message. When the transfer is complete,
the display will return to the SYSEX menu.
BULK DUMP: