Moog Music Taurus 3 Bass Pedals - Manual (Page 18)

Page 20
Taurus 3 User’s Manual - The Components
Page 21
Taurus 3 User’s Manual - The Components
During the bank selection process, the LCD will display the currently selected bank and preset location:
NOTE: When selecting Banks using the footwheels, the LCD becomes a non-editable display.
You cannot select the Bank or Preset using the VALUE encoder in this mode.
To change the bank, simply press a footpedal. For example, pressing the C# footpedal will select bank B:
After making a bank selection, press the BANK footswitch again to load the new preset (in this example,
‘B2’) and the Bank LED will stop flashing. The LCD will now display the Preset at location B2:
As an alternate method, while the Bank LED is flashing, you can press any of the four Preset footswitches
to immediately switch to the chosen preset within the selected bank without having to press the BANK
footswitch a second time. For example, suppose you have just selected bank D (footpedal D#):
If you now press Preset footswitch #3, the Taurus will immediately switch to Preset D3. The Bank LED will
stop flashing and the LCD will display the new Preset:
NOTE: If you press the BANK footswitch by mistake, pressing it a second time will cancel
the Bank Selection function.