Grain Systems PNEG-366 - Manual (Page 37)

37
18' Autoflow
Grain Systems, Inc. Assumption, Ill.
REV. 11-20-96
Figure #45
SMALL PLATFORM ASSEMBLY
For 36" Fans and Smaller or
with #1 fan when two 36" or smaller fans are installed
Before assembling any platform, read all of the instructions first to assure proper placement and assembly.
Refer to Figure #43 for proper location of small platform. Begin by assembling the small platform support frame using
3/8" x 1" bolts on all connections. Use 5/16" x 1.1/4" bin bolt to attach platform vertical supports to sidewall stiffeners.
Be sure and locate the 5/16" x 1.1/4" bolts from the inside of the bin to the outside. This will provide maximum weather
protection.
12
13
14
Key Part No. Description Quantity Weight
1 TD-100051 Channel Bracket 8 3.90
2 TD-100052 Handrail Post 49.3/4" 4 31.69
3 TD-100059 Long Toeboard 78.1/2" 2 10.96
4 TD-100060 Short Toeboard 54.1/2" 1 3.80
5 TD-100061 Long Handrail 78.1/2" 4 37.52
6 TD-100062 Short Handrail 54.1/2" 2 13.02
7 TD-100064 Floor Plank 78" 11 112.87
8 TD-100066 "X" Brace Strap 60" 4 7.26
9 TD-100067 Mid Channel Support 74" 2 32.73
10 TD-100070 Side Channel Support 78.1/2" 2 41.26
11 TD-100072 End Channel Support 78.1/2" 2 41.60
12 TD-100686 Vertical Support 70" 2 43.11
13 TD-100083 Support Channel 80.7/8" 2 32.98
14 TD-100084 Knee Brace 83.5/8" 2 23.67
15 TD-100090 Small Platform Hardware Package 1 8.96
Small Platform
36" Fans and Smaller
TD-100092
12"
Horizontal Seam