Grain Systems PNEG-366 - Manual (Page 13)

13
18' Autoflow
Grain Systems, Inc. Assumption, Ill.
5/16" X 3/4" BIN
BOLT
(S-275)
Figure #11
DETAIL "A"
DETAIL "A"
BOLT HEAD AND SEAL-
ING WASHER MUST BE
ON THE INSIDE OF THE
BIN.
REV. 11-20-96
TOP STIFFENER STARTING LOCATION
Refer to Figure #11, for proper location of top stiffeners. On the overlap of the stiffeners, and on the splice, use
3/8" x 1" hex bolts, a washer on the nut side connection. Refer to the stiffener layout, Figure #9, for stiffener usage.
All stiffeners are outside the bin wall. Use 5/16" x 3/4" Grade 5 bin bolts with head and neoprene washer to the inside
of the bin wall. Refer to proper charts and illustrations on the previous two pages for proper location of stiffeners and
sidewall sheets.
4.00"
TOP STIFFENER
SIDE VIEW
FRONT VIEW