Printronix T2N - Manual (Page 89)

89
Orientation
Orientation describes the rotation of the image relative to the Print Direction option.

Portrait (factory default). Represents 0 degree rotation.

Landscape. Represents 90 degree rotation.

Inv. Portrait. 180 degrees rotation.

Inv. Landscape. 270 degrees rotation.
As shown in Figure 20 (page 84), text is placed at the origin according to its Orientation setting.
PGL has its own independent setting for Orientation.
Print Direction
Print Direction defines Portrait relative to the direction of feed.

Head First. Feeds Portrait elements first.

Foot First (factory default). Feeds Portrait elements last as shown in Figure 20
(page 84).
Character Group and Character Sets
This menu item selects the character set used by the printer. Changing the Character Group
automatically changes the available selections in the Character Sets menu. Character Groups
and Sets are shown in the ZGL Character Sets section (page 121).
ZPL Compatible
This menu allows you to select the compatibility mode for ZGL.

ZPL-I = Zebra Programming Language I.

ZPL-II = Zebra Programming Language II.
The factory default is ZPL-II.
Command Prefix
This menu allows you to select the prefix for the control instructions command.
The range is 1-255, and the default is 126.
Label Prefix
This menu allows you to select the prefix for the format instructions command.
The range is 1-255, and the factory default is 94.
Delimiter
This menu allows you to select the delimiter used to separate the parameter of a command.
The range is 1-255, and the factory default is 44.