Printronix T2N - Manual (Page 21)

21
LED Indicators
LED State Indication
POWER
Off Printer power is turned off.
On Printer power is turned on.
ONLINE
Off Printer is offline or error occurred.
On Printer is online.
Blinking Printer is receiving data.
STATUS
Off Printer is offline.
On Printer is online.
Blinking
Printer is in error state:
Head Open, Paper Jam, Out of Paper, Ribbon Errors,
Cutter Error, Printhead Overheat, Calibration Error
Special Power-Up Key Combinations
To simplify operation, a few functions can be performed by holding down certain keys at
power-up.
Key Combination Function
FEED Key Printer will power-up and print a test page.
PAUSE Key
Printer will power-up and by default, force Auto-Calibration
regardless of the configuration option. (See Chapter 5,
Media/Sensor tab on page 71).
FEED + PAUSE Keys Printer will reset to its factory default parameters.
Clearing Data from the Buffers
This product does not have a CLEAR key or method of clearing the data within the internal
buffers. Turn the printer off/on to clear the buffer.
Setting Up the Printer
1. Place the printer on a flat, secure surface.
2. Ensure the power switch is off.
3. Plug the power cord into the AC power cord socket at the rear of the printer, then plug the power cord
into a properly grounded power outlet.
4. Connect the printer to the computer interface with the appropriate cable.