VEGA VVO VEGA Visual Operating - Manual (Page 54)

54 VEGA Visual Operating
12.7 User level
As
Operator no modifications can be made
on the connected instruments. Just observa-
tion and monitoring are possible. With
Main-
tenance a configuration of the measurement
loop is not possible. Other functions such as
e.g. adjustment or editing of linearisation
curves are possible. In the planning level all
functions except the service adjustments are
accessible. In this operating instruction we
always assume that you are in the planning
level. Click to
Planning and then click to OK.
As operator no user identification is enquired.
With maintenance only the user name is en-
quired. As planning engineer in addition a
password must be entered. Preadjusted are
for name as well as for password "VEGA“.
Later (started VVO) the passwords can be
modified. It is also possible to deactivate the
password enquiry. Click to
OK after you
have entered the name and the password.
This window shows that VVO is in contact
with the connected instruments.
During start of VVO you had to click to one of
the three user levels. The change to another
user level is possible without a new start.
Click to
Services and then to User level.
General VVO-functions