VEGA VVO VEGA Visual Operating - Manual (Page 25)

VEGA Visual Operating 25
Set-up of a signal conditioning instrument VEGAMET 614
With the reset to factory setting
(corresponds to "Reset to De-
fault“ on the display of VEGA-
MET) all parameter values of the
signal conditioning instrument
will be reset, e.g. adjustment
values, measurement loop name
etc. See also the menu plan of
the signal conditioning instru-
ment.
With "Reset to single measurement“ the ad-
justed configuration of VEGAMET will be
deleted and the instrument will be prepared
for the configuration of a single measurement.
Signal conditioning instruments with two
measurement loops (VEGAMET 515 and
515V) can be prepared with "Reset to linked
application“ for linked applications.