VEGA VVO VEGA Visual Operating - Manual (Page 48)

48 VEGA Visual Operating
General VVO-functions
12.5 Database
During the installation of VVO the directories
had been installed on your hard drive as
shown. In the directory
Data all data of the
connected instruments are automatically
saved as database. On the ending of the
database names you can recognize the kind
of instrument. The database of the connected
VEGAMET gets the ending
M00, the sensor
databases the ending
S00, the database of a
connected VEGALOG gets the ending
L00.
Example for the name:
If VVO gets in contact with a VEGAMET, a
database with the name
MET00.M00 is cre-
ated. If an additional VEGAMET with the
same DISBUS-address is added, the data
are saved in the same database.
If a VEGAMET with another DISBUS-address
is added, you can choose if the data should
be saved in the same file (
already existing
group) or if a new database should be cre-
ated (
new group). If you create a new data-
base, you can take over the name
MET01.M00 or enter a new designation (max.
8 digits, the ending M00 cannot be modified)
instead of MET01.
Edit database