VEGA VVO VEGA Visual Operating - Manual (Page 32)

32 VEGA Visual Operating
Set-up of a signal conditioning instrument VEGAMET 614
Here you can adapt the measurement
to the vessel geometry. This is only
important when you are interested in
the volume of your medium. If you have
another vessels form than the one
which could be selected in the window
"Linearisation“, click to
user program-
mable curve, then to Edit. You reach
then the window "Linearisation – user
programmable curve“.
After you have clicked in the window
"Instrument data parameter adjust-
ment“ to
Conditioning, you are in
the window "Conditioning“. Click to
Scaling .
In the window "Scaling“ you can choose as
parameter "Volume“, "Dimensionless“, "Mass“,
"Height“ or "Distance“ and the appropriate
unit. The sensor display will indicate then the
selected parameter. In addition you can enter
figures which are displayed between 0 %
and 100 %-level (e.g. 0 % correspond to
40,0 cm, 100 % correspond to 390,0 cm).
Save the adjustment, confirm the message
and return to the window "Conditioning“.