TROY Group MICR_IRD 3005 Security Printing Solutions User’s Guide - Manual (Page 88)

Section 4 Using the TROY Printer Utility
Security Printing Solutions User’s Guide -- 50-70410-002 Rev. A
4-42
Verifying Printer
Configuration
T O PRINT THE TROY CONFIGURATION PAGE :
NOTE: TROY Secure EX series printers must have the printer keylock switch set to
“Print MICR” to enable printing of the TROY Configuration page.
NOTE: TROY IRD 9050 1
UP series printers must have the 100-sheet multipurpose tray
installed to use standard-size forms for printing test and demonstration pages.
1. From the Main Window, click on
the printer you wish to manage.
2. Type in the current administrator
password in the password box at
the bottom of the Main Window.
If a password is not set, then leave
the password box blank.
3. From the Main Window, click on
File, Print, and then click on
Configuration Page. The printer
will automatically print the TROY
configuration page (see example
shown to the right
?).