TROY Group MICR_IRD 3005 Security Printing Solutions User’s Guide - Manual (Page 76)

Section 4 Using the TROY Printer Utility
Using the
Auto-Rotate
Feature Due to minor variations in registration (the precise alignment of text and images on the printed page) that exists
with most printers, it is recommended that the MICR line on your checks be positioned to print on the leading
edge of the printed page (the edge of the page that exits the printer first). MICR lines positioned on the trailing
edge of the page may be subject to small variations in the vertical placement of the MICR line, which may cause
the MICR line position to fall outside of the MICR line specifications. If the MICR line is located on the trailing
edge of the page, use the Auto-Rotate feature to automatically rotate your check image 180-degrees on the page.
T O R OTATE THE C HECK I MAGE :
1. From the Main Window, click on Settings, and
then click on ExPT Offsets.
Security Printing Solutions User’s Guide -- 50-70410-002 Rev. A
4-30
2. Click on the Image Rotate drop-down box and
select Enable.
3. After all desired values have been entered, click
on Update Printer to send the new settings to the
printer. All previous MICR line and image offset
values in the printer will be overwritten. The
system will prompt you with “Print Quality
Document to verify adjustments?” Click on Yes
to print the quality document, or click on No to
proceed without printing the quality document.
4. When closing the ExPT Offsets window, the
system will prompt you with “Do you want to
save changes to ExPT Offset values?” Click on Yes to save the new offset values in a user-named file for
future use (e.g., Acme print job offset values.ops), or click on No to continue without saving the new offset
values.
NOTE: TROY IRD 9050 1 UP series printers must have the 100-sheet multipurpose tray installed to use standard-size
forms for printing the Print Quality Document.