TROY Group MICR_IRD 3005 Security Printing Solutions User’s Guide - Manual (Page 100)

Section 6 Using the Printer Control Panel
Security Printing Solutions User’s Guide -- 50-70410-002 Rev. A
6-2
Accessing Printer
Features
Entering the
Administrator
Password
(2420,
2430, 4250, 4350
Series Printers)
T O ACCESS PRINTER FEATURES ( ALL PRINTER MODELS ):
1. Press the W button until the desired menu selection is displayed, and then press the button. If additional
second-level menu items appear, press the W button to select the desired option, and then press the button.
2. Press the Up/Down button until the desired value is displayed.
3. Press the button to save the desired value. An asterisk will be displayed next to the selected value.
4. Press the Menu button to place the printer back on line.
A valid administrator password must be entered at the printer control panel before access is allowed to any of the
TROY security features and settings. If an administrator password has not been previously set, then the default
password is blank (no password).
T O ENTER THE ADMINISTRATOR PASSWORD (2420, 2430, 4250, AND 4350 S ERIES P RINTERS ):
1. Press the W button to select
TROY MENUS
, and then press the button.
2. Press the W button to select
SECURITY MENU
, and then press the button.
3. Ensure
ACTION
is highlighted, and then press the button.
4. Press the W button to select LOG IN , and then press the button.
5. Press the W button to select USER ID , and then press the button.
6. Press the W button to select the letter A , and then press the button. Repeat this process until you have
entered the word
ADMIN
. Press the button three more times to continue.
7. Press the W button to select
PASSWORD
, and then press the button.
8. Enter your password, and then press the button. If a password has not been set, then press the button
repeatedly to exit this field and continue.
9. Press the Menu button to refresh the menu options. The menu options must refreshed to ensure that all
available menu selections are displayed on the printer control panel.
10. Press the W button to select the desired menu option, and then press the button to continue.