TROY Group MICR_IRD 3005 Security Printing Solutions User’s Guide - Manual (Page 107)

Section 6 Using the Printer Control Panel
Security Printing Solutions User’s Guide -- 50-70410-002 Rev. A
6-9
Using the
Exact
Positioning
Technology
(cont.) T O ADJUST THE POSITION OF THE PAGE IMAGE :
1. If not already logged into the printer control panel, enter a valid administrator password ( see page 6-2 ).
2. Press the W button to select
TROY MENUS
, and then press the button.
3. Press the W button to select SETTINGS MENU , and then press the button.
4. Press the W button to select the desired adjustment parameter ( PAGE ADJUST X DECIPOINTS or PAGE ADJUST Y
DECIPOINTS
), and then press the button.
5. Enter the desired decipoint offset value (-720 to +720) to reposition the page image (X=horizontal and
Y=vertical), and then press the button to save each decipoint value. Each decipoint is equal to 1/720th of
an inch. Repeat this step for each parameter you wish to change.
6. Print a test page to evaluate the MICR line position adjustment. Repeat the adjustment as necessary. Use the
TROY MICR Document Template to verify all MICR line adjustments.