Operating state of the temperature controller – M&C TechGroup CG-2H-W_-2MH-W Operator's manual User Manual
Page 25
25
Gas sampling and conditioning technology
9-0.2-ME
Heating up
Heating flashes
Ramp function
Sensor control
Set-point display, green
PGM key
- to select the parameters
Decrement key
- to alter values
Increment key
- to alter values
EXIT key
- to quit the levels
LED for ramp/programme function, green
LED for status indication, yellow
- outputs 1 to 3
18.2
OPERATING STATE OF THE TEMPERATURE CONTROLLER
The
operating state is displayed via the LED‟s 1 to 3 like:
Operating state
1
2
3
Heating up
off
on
blinking
Normal
heating on
on
on
on
heating off
on
on
off
Alarm
X
off
X
In case of a high or low temperature alarm, the controller passes automatically into the state of self-
locking heater switch off.
18.3
CHANGING THE PARAMETERS OF THE TEMPERATURE REGULATOR
The programming of the regulator is made on different levels.
All important adjustments of the converter are listed in the user level and can be modified after remov-
ing the key locking.
In order to remove the locking, please proceed as follows:
Setting value reached
Operating temperature
or setting value reached