M&C TechGroup CG-2H-W_-2MH-W Operator's manual - Manual (Page 13)

13
Gas sampling and conditioning technology 9-0.2-ME
9 TECHNICAL DATA
Converter Series CG
®
Version
CG-2 CG-2M CG-2H-W CG-2MH-W
Part-No. Converter 50A1600 (a) 50A1500 (a) 50A1900 (a) 50A1920 (a)
Part-No.Converter cartridge Type C Carbon-
Molybdenum 95A9003
Part-No.Converter cartridge Type SS metallic
Filling 95A9004
Gas inlet and –outlet non-heated (cold) or
heated (hot)
non-heated non-heated heated heated
Bypass solenoid valves -------- 2 x -------- 1 x
Gas inlet temperature max. +80°C,
dew point „dry“
max. +250°C,
dew point <160°C
Temperature adjustment of converter max. 680°C
Gas flow rate 30 – 60 Nl/hr, max. 90 Nl/hr
Operating pressure max. 2 bar abs.
Warm-up time ca. 30 min.
Volume of the converter cartridge appr. 35 cm
3
Operating temp. converter cartridge type C min. 320°C typ. 350°C max. 380°C
Operating temp. converter cartridge type SS min. 620°C typ. 660°C max. 680°C
Max. NO
2
concentration 1000 ppm (type C), 2000 ppm (type SS) at new catalyst
Conversion rate NO
2
in NO Effectiveness > 95 % for a new catalyser
Service life of the NO
2
/NO catalyser To be exchanged preventively every 6 months
Differential pressure < 20 mbar
Ambient temperature +10°C to +50°C
Storage temperature -25°C to +65°C
Relative air humidity < 80 %
Connection sample gas inlet and outlet PVDF-fitting G1/4 i DIN 228/1 ø6mm tube fitting, 1.4571*
Tension / power consumption 230V 48-62Hz
or 115V 48-62Hz (a),
520W
230V 48-62Hz
or 115V 48-62Hz (a),
620W
Electrical connections Mains power plug connector incl. 2 fine fuses 5x20mm,
230V/3,15A TT or 115V/6,3A T ,
2m cable with shockproof plug.
Alarm- and control signals 9 pin Sub-D-connector
Statussignals for temperature 1 Contact potential free, max . contact rating 24V, 1A
Material of sample contacting parts Stainl. Steel SS316, PTFE, FPM Stainl. Steel SS316, aluminium
hardcoated, FPM
Degree of protection IP 20, EN60529
Housing 19" rack mounting,
3 HE, depth 350 mm
Wall mounting,
height 350mm, depth 3HE
Weight Approx. 6 kg
Electrical equipment standard EN 61010, EN 60519-1
Option for CG-2 and CG-2M Mounting bracket, 3 HE - 84TE, Part No.: 50A3000
 Standard ø 6mm connection, optional ø ¼“ – please indicate with order.